Temperature & Humidity Transmitters

Flameproof Duct Humidity Transmitter

Flameproof Duct Humidity Temperature Transmitters are especially designed for HVAC applications for simultaneous dual analog 4-20 mA outputs corresponding to temperature & humidity.

Specifications:

The Flameproof Duct Humidity Temperature Transmitter is ideal for connecting outputs onto BMS/PLC/SCADA since it provides industry standard 4-20 mA Analog Outputs & also comes with optional RS 485 Modbus communication.
Flameproof Duct Humidity Temperature Transmitter is designed for use in hazardous areas & is housed in aluminum LM-6 Body certified by CIMFR, Dhanbad for use in Gas Group Areas I, II, IIA & IIB.
The Flameproof Duct Humidity Temperature Transmitter has a measuring range of -30.0 to 60.0 Deg. C for temperature & 0.0 to 100.0% R.H. Non Condensing.
It comes with a duct mounting clamp & is best suited for use in hazardous pharmaceutical applications, flameproof clean room applications, Intrinsically Safe applications & ATEX applications.
Also available as only flameproof humidity transmitter with only 1 analog output of 4-20 mA corresponding to 0.0 to 100.0% R.H. Non Condensing.

Temperature Transmitter

Temperature Transmitters are 2 Wire Loop Transmitters and are industry standard devices used with RTD Pt -100 Sensors & all thermocouples for signal transfer over long distance using a pair of normal copper wires without EMI/RFI Interference over distance. These are available in head mounted, panel mounted & IP 65 Wall Mounted enclosures. The Temperature Transmitters in the Head Mounted Type Fitment give an output of 4-20mA & the DIN Rail Mounted Temperature Transmitters give an output of either 4-20mA or 0-10 V.D.C. Analog. Signal convertors for converting the 4-20mA Output to 0-10 V.D.C. Output are also available. The range is factory set as per customer specifications. Temperature Transmitters are also available in IP65 Wall Mounting Enclosures in ABS Plastic. Temperature Transmitter models are available with inputs of RTD Pt-100, J, K, R, S & T Type Thermocouples.

Infrared Temperature Transmitter

Infrared Non Contact Temperature Transmitters detects and converts the amount of infrared energy into a temperature value. Because the method is non-contact, it enables quick and easy measurement of the target temperature from a safe distance. It converts the temperature measured to an analog 4-20mA output Signal.

Salient Features:

· High-speed response time 100ms/90%

· High heat resistance upto 70°C of ambient temperature

· High noise resistance and accurate temperature measurement with stable operation due to SUS body and silicon lens

· Cylindrical shape enabling installation in a limited space

Specifications:

Measuring Range : - 0 to 200/400°C

Accuracy : 0 to 200°C: ± 2°C; 201 to 400°C: ± 1%

Ambient operating range : 0-70°C

Vibration Resistance : 10-55Hz, Amplitude 1.5mm, Two hours each in the direction of X, Y, Z

Analog Output : 4-20 mA

Emissivity : ratio Adjustment: 0.95

Power Supply : DC 12-24 V+10%/ Max 70 mA

Waterproof Grade : IP67

Warranty : 12 months manufacturer warranty

Back on top